Measure Amp Draws on compressor, Motors and Heat Strips
Inspect Outdoor Fan Blade
Clean and Adjust Blower Wheel if Needed
Clean and Inspect Flow of Condensate Drain
Inspect and Test Defrost Cycle
Inspect Crank Case Heater
Test Capacitors
Reassemble Unit, Replace Any Missing or Rusted Screws
Wash Unit and Apply Protective Coating
Monitor and Record Delta T
Inspect Duct System
Monitor Air Flow
Inspect Thermostat and Reset to Customer Desire Settings
Cycle System to Ensure Proper Operation
Gas Heating Tune Up
Replace Filter / Clean If Permanent
Disassemble Unit
Clean and Adjust Burner Assembly
On Inshot Burners, Clean Between Carryovers and Align
Inspect Heat Exchanger
Inspect and Clean Combustion Blower Assembly
Inspect Ignitor and Pilot Assembly
Clean Pressure Switch Hose
Monitor Gas Pressures
Inspect Gas Piping / Connections for Leaks
Test Safeties / Monitor Flue
Clean Evaporator and Condenser Coils
Remove All Leaves and Debris
Inspect Outdoor Fan Blade
Clean and Adjust Blower Wheel if Needed
Clean and Inspect Flow of Condensate Drain
Test Capacitors Reassemble Unit, Replace any Missing or Rusted Screws
Wash Unit and Apply Protective Coating
Monitor and Record Delta T
Inspect Duct System
Monitor Air Flow
Inspect Thermostat and Reset To Customer Desire Settings
Cycle System to Ensure Proper Operation
$30 OFF
System Tune-Up
Keep your HVAC System running at its peak performance with a heating and air system tune-up.
Available for a Limited Time - Act now!Plus sales tax. May not be combined with any other offer. One coupon per customer. Valid on residential systems only. Present coupon at time of service.
Print Coupon
