Garner NC Heating & Air Conditioning Services
Local Reviews
for Garner, NC
Customers say: The recent reviews exhibit a positive overall sentiment, with a slight inclination towards the positive. The reviewers express satisfaction with the services provided, highlighting the helpfulness, expertise, and professionalism of the technicians. They mention the timeliness, efficiency, and quality of the work done. Additionally, the reviewers appreciate the courteous and respectful behavior of the technicians, as well as their willingness to answer questions and provide detailed explanations. The positive reviews also mention the positive experiences with the company's customer service, including the ease of scheduling appointments, the clarity of the pricing, and the overall positive impression left by the technicians. However, it's worth noting that the negative reviews are fewer in number and do not contain any significant negative sentiment. Overall, the reviews suggest that customers have had positive experiences with Jackson and Sons and would recommend their services to others.
Our Reviews by City
Great service!
3HC - Garner, NC 27529
Excellent Service!
3HC - Garner, NC 27529
Great service!
3HC - Garner, NC 27529
Excellent Work
WEGMAN - Garner, NC 27529
Campbell was very professional. He was friendly and warm. Came into my home and proceeded to his job. His work was very sufficient.
Excellent service
MASTERS - Garner, NC 27529
Great & Friendly Service
KRISTIN - Garner, NC 27529
Juan R was courteous, professional and knowledgeable!
Amazing Service
DAWN - Garner, NC 27529
I trust them with all my AC maintenance and check ups!
Amazing service
DAWN - Garner, NC 27529
Jason was very thorough…he explained everything he was doing and took his time to get it right!
Great friendly service!
Dawn - Garner, NC 27529
Tyler was very respectful when he came to the house. He quickly took care of my AC issue.
Exceptional AC Installation Services
Kim - Garner, NC 27529
We watched our utility bills climb and didn't realize how bad it got until we got our first utility bill in the mail - after the installation. We saved 35% off our power bill and we have Jackson and Sons to thank!
Great service
Victoria - Garner, NC 27529
John and Victoria Daniel
Victoria - Garner, NC 27529
Great Service
C - Garner, NC 27529
Outstanding Service As Always!
JT - Garner, NC 27529
I have been a Jackson and Sons customer for almost 12 years. The quality of service and professionalism regardless of the technician never changes. Outstanding service! A+ 100%.
Great service
Harold - Garner, NC 27529
Landen H.
Tech washed and serviced unit and found blower housing to have some bacteria build up tech pulled and cleaned blower and informed customer of finding and recommended adding Uv light protection to prevent buildup in the future customer is familiar with Uv light from having at other properties would like to wait for now unit is up heating properly after todays visit.
Aidan T.
- Tech replaced thermostat with customer-supplied Honeywell thermostat (no Common) and advised customer to replace triple A batteries when needed. Programmed for straight AC/LP and set to permanent hold with no schedule per customer request. - Replaced failed draft inducer assembly and related hardware. - Cleaned burner assembly, igniter, and flame sensor. - Recommended premium service agreement; customer will contact office when financially feasible. - Confirmed proper heating operation and LP gas pressures. System is operating normally at this time. Advised customer to replace air filter soon due to condition.
Aidan T.
- Tech found failed draft inducer upon arrival. Inspected system and noted corroded burner assembly; recommended cleaning and replacing the draft inducer. - Customer wants to replace the thermostat and will purchase their own. - Customer approved part order and burner clean. Customer acknowledged age of the system and potential costly repairs. Advised further diagnostics/repairs may be needed after the draft inducer is replaced. Inspected heat exchanger and found no cracks or damaged areas. Left power off at disconnect.
David C.
Install Duct detector in return duct and connect to unit.
Jerry H.
Will return with detector and box to weather proof it on the outside of the return where it can sense the return air better. One person is all that’s needed for this. 12/27 returned but did not install detector due to previous unit did not have one either. No alarm panel in building. No detectors on any systems. Checked fuses per data plate and they are correct. Set up inspection and if inspector requires detector can install same day with weather proof box.
Ricardo T.
Tech washed and serviced unit and found no challenges at this time.
Matthew L.
Performed pre smoke test on 15 ton package unit. Passed pre smoke test. No alarms went off just system shut down.
Percy M.
PERFORMED CMA INSPECTION ON 1 HEAT PUMP SPLIT SYSTEM. TECH CHECKED FAN, COMPRESSOR AND BLOWER MOTOR AMPERAGE. AMPERAGE CHECKS WERE INSIDE CORRECT SPECIFICATIONS. SYSTEM IS HEATING AND COOLING PROPERLY. TECH CHECKED THERMOSTAT TO ENSURE IT IS FUNCTIONING PROPERLY. TECH COMPLETED FILTER CHANGE AND FLUSHED DRAIN LINES. THERE ARE PICTURES AND A PERFORMANCE REPORT ATTACHED TO THIS INVOICE.
Percy M.
PERFORMED CMA FULL SERVICE ON 3 SPLIT SYSTEMS. UPON ARRIVAL CUSTOMER EXPRESSED CONCERNS ABOUT OCCUPATIONAL THERAPY ROOM #1 WHICH IS CONTROLLED BY SPLIT SYSTEM #2. CUSTOMER STATED ROOM SEEMED TO BE WARMER THAN USUAL. TECH CHECKED THERMOSTAT AND FOUND THERMOSTAT WAS SET TO 74 DEGREES AND WAS ON A TEMPORARY HOLD, THE INSIDE TEMP ON THERMOSTAT WAS 71 DEGREES. TECH TOOK HOLD OFF THERMOSTAT AND BROUGHT SYSTEM ON, TECH TOOK DELTA T AND FOUND A RETURN OF 73 DEGREES AND A SUPPLY OF 56 DEGREES. SYSTEM HAS A DELTA T OF 17 DEGREES AND IS COOLING PROPERLY, TECH ADVISED CUSTOMER TO SET THERMOSTAT TO A LOWER TEMP AND THAT IF THERMOSTAT IS SET TO A HIGHER TEMP THAN THE ROOM TEMP, SYSTEM WILL NOT COME ON. THERE ARE NO ISSUES WITH SPLIT SYSTEM #2. TECH CLEANED CONDENSER AND EVAPORATOR COILS OF SYSTEMS AND CLEANED OUTSIDE CONDENSER UNITS. TECH COMPLETED FILTER CHANGE OF 10-20x20x1 FILTERS AND FLUSHED OUT ALL DRAIN LINES. TECH CHECKED FAN, COMPRESSOR AND BLOWOR MOTOR AMPERAGE, ALL AMPERAGE CHECKS WERE INS
Josh W.
Tech performed esa on one system, tech found no issues and system is back on and operating properly at this time. Customer renewed service agreement.
Kenny C.
Performed ESA, tech found no issues at today visit. System has been serviced and is back on and cooling/heating. Homeowner did not allow tech inside.
Kenny C.
Performed ESA, tech found system 1lb low on R401A. Tech informed homeowner and homeowner approved. Still wants to hold off on further options for repair. System is back up and cooling.
Derek J.
Upon arrival tech was informed there was water coming from the aux pan drain. Found primary drain clogged causing system to overflow and drain into aux pan which had about 3/4” of standing water in it. Tech brushed out trap and used nitrogen to clear primary drain line, also blew out aux drain line. Used transfer pump to remove water from aux drain pan. System is back draining properly.
Kyle W.
Found system low on charge due to leaks within heavily rusted evaporator coil. Charged system up for now per customer request. Added 3LBS of R410a. Selling home soon.
Kyle W.
Found thermostat faulty. Replaced with FP5000. Cycled system with no further challenges.
Romario T.
Apartment 306. Tech found a leak at the same spot that was repaired in April. Tech spoke with the office and was told to take care of the repair under service warranty. Tech brazed up the leaking section and pressure tested to 400 psi. Pulled down a vacuum below 500 microns and charged the system with 10lbs of R410a refrigerant system is back cooling.maintenance man was not on site prior to departure.
Kenny C.
Upon arrival customer stated he believes system might of caused a power outage. Stated store lost power at one point and then came back on, tech inspected entire system. Both compressor amp draws are within spec, cycled system twice and came on and ran without any issues. Inspected proper voltage. Informed customer can’t duplicate issue if it’s even coming from unit. System was running upon arrival and departure.
Dalton B.
Replaced thermostat wire
Derek J.
Upon arrival tech was informed system was not running. Inspected system and ensured setup was correct on Symbio. Tech checked for 24v on board and had 24v at R, Y1, G, Y2 and W1. Also heard inducer draft attempting to cycle on. Tech shut power off and disconnected wires at thermostat and inside system to check for continuity. Got a reading across R and W but no other wires. Disconnect the W wire from thermostat and used Brown on W1 and connected a jumper from W1 to W2 inside system. Turned power on system came back on. Tech recommends replacing thermostat wire to be able to connect W1 and W2 stages correctly. Will need 2 people to replace wire and approximately 60’ of wire. System is back operational at this time.
Luis R.
Techs re-diagnosed thermostat wires and found no shorts. Reconnected wires and shortened excessive thermostat wire inside the unit. System is operating normally at this time.
Kyle W.
FOUND SYSTEM RECEIVING CONSTANT VOLTAGE FOR HEAT, EVEN WITH THERMOSTAT DISCONNECTED. ALSO ONLY SENDING PARTIAL VOLTAGE FOR COOLING INTERMITTENTLY, AND SOMETIMES UNABLE TO DROP CALL FOR COOLING CAUSING TO RUN CONTINUOUSLY. SEPARATED ALL THERMOSTAT WIRING AT THERMOSTAT AND UNIT. FOUND CONTINUITY BETWEEN R TO Y, BROWN(W1/2), AND Y2 (O). ALSO BETWEEN COMMON AND G. MULTIPLE SHORTS WITHIN THERMOSTAT WIRING. NO EXTRA WIRING TO WORK WITH. WILL NEED (2) TECHNICIANS TO RUN NEW WIRING FROM THERMOSTAT TO SYSTEM. FOR TIME BEING, TECH WAS ABLE TO RE-LOCATE THERMOSTAT TO INSIDE RETURN OF SYSTEM, AND TIE INTO SPLICE AT SYSTEM. EXPLAINED SITUATION TO MANAGEMENT. SET TO 72 PER REQUEST. SYSTEM IS NOW CYCLING PROPERLY. NEED TO CONTACT ASAP TO SCHEDULE REPAIRS. WARRANTY. SPOKE WITH MRS. HUTCHINSON.
Demarcus M.
KITCHEN UNIT-17.5 TON GAS PACKAGE UNIT
Joseph C.
Tech inspected mini split and found system freezing up due to low on refrigerant tech found leaking evaporator coil after getting approved for leak search. Customer doesn’t want to do anything due to building being demolished in the near future.
Kyle W.
SYSTEMS #2, 3 AND 4 DOWN UPON ARRIVAL. MANAGER STATED NOT TO CHECK #2 AS IT IS NOT IN USE. (SYSTEM #3) FOUND FAILED CONTACTOR. REPLACED 40A 2POLE CONTACTOR AND CYCLED WITH NO FURTHER CHALLENGES. (SYSTEM #4) PREVIOUSLY DIAGNOSED FAILING COMPRESSOR IN 2022. BREAKER WAS OFF. CYCLED SYSTEM WITH PRESSURES WITHIN SPECS FOR TODAYS ENTIRE VISIT. COMPRESSOR AMP DRAW IS HIGH AT 17 RATED FOR 19. COMPRESSOR IS LIKELY FAILING CONSIDERING PAST FINDINGS, BUT SYSTEM IS COOLING AT THIS TIME. BUILT ESTIMATE FOR COMPRESSOR REPLACEMENT. COSTLY REPAIRS MAY NOT BE RECOMMENDED. HANDED OVER TO FIELD SUPERVISOR AS WELL. LEFT OFF AT THERMOSTAT AND WILL USE AS NEEDED.
Matt C.
Tech performed esa on trane split heat pump, found no challenges at todays visit Customer extended psa