Local Reviews
for Aurora, IL
Our Reviews by City
Josh R.
Applied second application of duct armor to all underground ductwork and furnace box.
Josh R.
Cleaned and televised all underground ductwork to identify any issues. Applied the first coat of Duct Armor, ensuring thorough coverage throughout the duct system. Used specialized spray equipment for an even application. Inspected the coating for uniformity and adhesion. The ductwork is now protected, enhancing durability and air quality.
Bob S.
Utilized pipe bursting methods for a trenchless sewer line replacement. Excavated entrance and exit pits, then pulled a bursting head through the existing terra cotta pipe while simultaneously pulling the new seamless HDPE pipe into place, effectively upsizing the line without trenching.
Bob S.
Sprayed second application of duct armor to all duct runs register boots and plenum.
Josh R.
I applied the first layer of Duct Armor to all underground ductwork and the furnace box. This treatment is designed to seal and protect the ducts from deterioration and improve air quality. The process involved thoroughly cleaning the ducts before applying the specialized lining, ensuring a durable and effective seal against moisture and debris.
Josh R.
In Aurora, IL, I performed a thorough cleaning of all underground ductwork, ensuring the removal of debris and buildup. Subsequently, I applied spin cast mortar to all connections and elbows to reinforce their integrity and seal potential leaks. Additionally, I meticulously rebuilt all registers and the plenum box using mortar, enhancing their structural stability and optimizing airflow efficiency throughout the duct system.
Bob S.
Televised ducts under slab floor. Ducts are concrete ducts showing slight signs of dirt in line with metal fittings only showing slight signs of rust. Will provide proposal for spray lining with Duct Armor duct lining material to encapsulate the concrete pipe.
Bob S.
Televised ducts under slab floor. Ducts are concrete possibly Transite with metal fittings that are rusting. Suggest spin casting metal fittings then spray lining entire system with Duct Armor.
Bob S.
Under slab ductwork video inspection service call. Televised ducts under slab floor. Ducts are PVC ducts showing signs of possible mold. Suggest spray lining with Duct Armor.
Kevin W.
Piping repair service call. Descaled 10’ of 4” cast, Installed spot repair liners 10’ in total using silicate resin from overhead stack clean out in basement, starting in 4” pvc ending in 6” pvc to cover over all 4” cast iron where there was a break near foundation wall.
Kevin W.
We are doing a video inspection of the underground duct work which is pvc pipe with metal elbows.
Bob S.
Televised ducts under slab floor. Ducts are spiral wound metal and are showing signs of rust. Suggest spin cast mortaring then spray lining ducts with Duct Armor duct lining material.
Bob S.
Televised ducts under slab floor. Ducts are pvc with metal tees that are rusting and allowing water into the ducts. Suggest spray lining with Duct Armor duct lining material. Also suggest installing an outside sump pit and pump.
Jim D.
We are applying the second application of our rubberized duct lining material to all of the deteriorated underground duct work. The duct work will be completely sealed and mold and debris will no longer enter the system.
Kevin W.
We are going to clean and restore all of the heavily rusted underground duct work. We are applying our Trenchless cast mortar to all of the heavily rusted elbows and connections in underground duct work. This will give them a strong structure and debris will not be able to enter from these areas. We are also going to apply the first of two applications of our rubberized duct lining material. This will completely seal the underground duct system.
Kevin W.
We are inspecting the heavily deteriorated underground air ducts with our camera and looking for rusted areas and mold.
Bob S.
Televised ducts under slab floor. Ducts are spiral wound metal and showing signs of water and rust. Bathroom elbow is very rusted and deterating and needs to be spin cast mortared. Downspouts in back of entire building need to be run out and the concrete patios are all tilted back towards unit. After water issue is resolved the ducts should be spin cast mortared in two locations then spray line the entire system with Duct Armor duct lining material.
Jim D.
Encapsulated all deteriorated underground duct work with our rubberized duct lining material. The air in the home is now environmentally safe to breathe.
Bob S.
Televised ducts under slab floor. Ducts are galvanized metal and showing heavy signs of rust and deterioration. Suggest spin cast mortar and then spray lining with Duct Armor duct lining material.
Kevin W.
Applied our trenchless cast to all the underground duct work that was heavily rusted and deteriorated to give the host pipe structure in preparation to seal with our duct lining product leaving a solid pipe, and a clean breathing environment.
Kevin W.
Replaced crushed PVC duct lines with 8” galvanized metal air ducts.
Bob S.
televised ducts under slab floor. Ducts are PVC ducts with metal connections. Can see areas where water and debris have been making it's way into the ducts. All downspouts appear to be dropping right next to the house. These need to be extended away from the house to reduce the water that may be getting into the ducts. Gutters should also be inspected by a gutter contractor. Gutters in the back of the house appear to be pulling away and also looked to be clogged. After water issues are resolved the ducts should be spray lined with Duct Armor duct lining material to provide a cleaner and healthier breathing environment.
Bob S.
Video inspection of underground air ducts showed metal ducts extremely rusted with standing water. Customer needs to extend all downspouts then spin cast mortar ducts to restore structure. After that they should be spray lined with Duct Armor duct lining material.