Local Reviews
for Birmingham, AL
Our Reviews by City
Outstanding
Jason - Birmingham, AL 35244
These guys went above and beyond my expectations.
Response from Pro Services LLC:
It was a pleasure serving you and your family. We really appreciate you taking the time to share your feedback with us and the community.
Brandon B.
I finished up an HVAC repair focused on restoring the cooling function. Upon arrival, I found that the system was not cooling properly due to a malfunctioning capacitor and low refrigerant levels. I replaced the faulty capacitor, which improved the system’s performance, and recharged the refrigerant to the appropriate levels. Additionally, I checked the compressor and blower motor, confirming both were in good working condition. After completing the repairs, I tested the unit to ensure proper cooling, airflow, and temperature control. The system is now running efficiently, and the customer’s home is cooling properly once again.
Mason B.
I installed a new 40-gallon electric water heater for a customer. The previous unit had corroded due to age, causing leaks. I first drained the old tank and disconnected the electrical and water connections. After removing the old unit, I installed the new model, making sure to upgrade the T&P relief valve and install new dielectric unions to prevent future corrosion. I tested the system after filling the tank with water, ensuring that both the heating element and thermostat were functioning properly. The water heater is now operational, delivering hot water throughout the home.
Mason B.
Today, I repaired a hot water heater that was not producing sufficient hot water. Upon inspection, I found the heating element was faulty and needed replacement. I drained the water heater to safely access the element, removed the old one, and installed a new heating element. Additionally, I checked the thermostat and pressure relief valve to ensure they were functioning properly. After refilling the tank, I restored power to the unit and tested it for proper operation. The water heater is now heating efficiently, and the customer has a steady supply of hot water. The system is working perfectly.
Mason B.
I was called to perform an electrical repair due to a faulty main breaker that was causing power issues. After diagnosing the problem, I safely replaced the bad breaker with a new one, ensuring all connections were secure and up to code. Once the replacement was completed, I tested the system to confirm power was fully restored throughout the home. The repair was successful, and the customer’s electrical system is now functioning properly without any further issues.
Mason B.
I performed a septic tank inspection and pumping for a homeowner experiencing slow drainage. Using a Rothenberg camera, I inspected the tank and drain field to identify any blockages or issues. After pumping out the tank with a vacuum truck, I found no significant issues. The system was functioning correctly, and I advised the homeowner on routine maintenance to prevent future problems.
Mason B.
I completed a thorough maintenance check on a Lennox XC25 air conditioning system. This included cleaning the air handler's evaporator coils with a foam coil cleaner, checking refrigerant levels, and inspecting the condensate drain for blockages. I also replaced the dirty air filter with a new HEPA filter. The system was tested and is now running smoothly, ensuring consistent cooling.
Mason B.
I installed a new AO Smith 40-gallon electric water heater, replacing an outdated unit. The installation involved connecting the new heater to the existing electrical supply and water lines, securing all connections, and setting the thermostat to the recommended temperature. I also installed a thermal expansion tank to prevent pressure build-up. The system was tested and is now operating efficiently.
Mason B.
I conducted leak detection using a FLIR thermal imaging camera to locate a hidden leak in the ceiling. The homeowner noticed water stains forming. The thermal imaging identified the source as a pinhole leak in a copper pipe. I marked the location and discussed repair options with the homeowner, ensuring minimal disruption during the repair process.
Mason B.
Fixed a leaky Delta shower head by replacing the worn-out cartridge with a Delta RP46074 replacement part. Removed the old cartridge, cleaned the valve body, and installed the new cartridge to ensure a secure, leak-free fit. Also checked the shower arm and connections for any additional leaks, tightening as needed. Proper maintenance of shower fixtures is essential to prevent water waste and maintain efficiency. For expert plumbing repair services, contact us to keep your fixtures running smoothly.
Brandon B.
Diagnosed and repaired a Trane XR14 air conditioning system exhibiting insufficient cooling. Utilized Fieldpiece SMAN360 digital manifold to detect low refrigerant charge. Located refrigerant leak at Schrader valve using Inficon D-TEK Select leak detector. Replaced faulty valve core with JB Industries A31406 core removal tool. Recharged system with R-410A to manufacturer specifications. Cleaned condenser coils using Nu-Calgon 4291-08 Nu-Brite for improved heat transfer. Installed new Honeywell FC100A1037 MERV 11 air filter. Post-repair testing confirmed proper system operation, restoring optimal cooling performance and energy efficiency.
Brandon B.
Installed recessed lighting in the great room, using Halo H7ICAT 6-inch housings for energy efficiency and a clean look. Connected the housings to the existing electrical wiring, ensuring all connections were secure and up to code. Installed dimmable LED retrofit trim kits for adjustable lighting and long-term energy savings. Tested each light to ensure proper operation and adjusted the spacing for optimal illumination. For professional and efficient lighting installation, contact us to enhance your home’s lighting design.
Mason B.
Started a roofing job on a residential property, utilizing Owens Corning Duration shingles for their durability and weather resistance. Removed old shingles and inspected the roof deck for any signs of damage, replacing any compromised sections with high-quality plywood. Installed a new underlayment to ensure moisture protection, followed by the application of the Duration shingles. Secured all materials with galvanized roofing nails to prevent rust and leaks. Proper roofing installation is crucial for long-term protection. For expert roofing services, contact us for reliable and professional solutions.
Brandon B.
Addressed a malfunctioning Goodman GSX140361 air conditioning unit. Diagnosed faulty dual capacitor using Fluke 902 FC HVAC clamp meter. Replaced with TITAN PRO TOCF45 45/5 MFD 370/440V capacitor. Cleaned condenser coils using Nu-Calgon 4291-08 Nu-Brite to improve heat transfer efficiency. Recharged system with R-410A refrigerant, utilizing Fieldpiece SM480V digital manifold. Installed new Honeywell R8285D5001 control center for enhanced system management. Conducted amperage draw test on compressor and fan motors. Post-repair performance check confirmed proper cooling operation and restored system efficiency, ensuring optimal comfort for the homeowner.
Mason B.
Drain cleaning. Customer was backing up into shower. Ran drain machine and cleared clog. Customer was happy we were in and out fast
Mason B.
Plumbing repair on shower faucet
Mason B.
I recently completed a job at a customer's house in which I replaced the compressor in their air conditioning unit. The compressor is an essential component of the AC system, as it helps to circulate refrigerant throughout the system and regulate the temperature inside the home. Upon arrival at the customer's house, I assessed the situation and determined that the compressor was the root cause of the AC unit's malfunction. I carefully removed the old compressor and replaced it with a new, high-quality model that was specifically designed for the customer's unit. Throughout the installation process, I took great care to ensure that all connections were properly made and that the new compressor was securely installed. I also double-checked all of my work to
Brandon B.
I recently completed a job on a commercial 10-ton Trane unit. The unit had to be charged and restarted to ensure its proper operation. As a highly skilled and experienced home service professional, I carefully assessed the unit's electrical system and made the necessary adjustments to ensure a smooth charge. I also checked the unit's refrigerant levels and made any necessary adjustments to optimize its performance. Finally, I tested the unit's functionality and ensured it was operating at optimal efficiency. This job required a deep understanding of HVAC systems and a high level of skill and expertise to ensure the unit was charged and restarted correctly.
Brandon B.
Completed a kitchen repiping project. Replaced old galvanized steel pipes with durable copper or PEX piping to enhance longevity and prevent corrosion. Installed shut-off valves for individual fixtures to facilitate maintenance and repairs. Ensured proper sizing and alignment of pipes to optimize water flow and pressure. Conducted pressure testing to confirm integrity of the new piping system. The kitchen now boasts upgraded plumbing, promoting reliable water supply and minimizing potential issues.
Brandon B.
I recently completed a job where the customer's AC was not cooling. After a thorough inspection, I found that the capacitor needed to be replaced. To ensure optimal performance, I also installed a hard start kit. The hard start kit helps to reduce the starting current of the compressor, which in turn increases the lifespan of the compressor and decreases the risk of overheating. The job was completed successfully, and the customer was satisfied with the results.
Brandon B.
As an HVAC contractor, I recently completed the task of charging up an HVAC Rheem 10 ton commercial unit. This involved carefully measuring the system's refrigerant levels and adding more as needed to ensure optimal performance and energy efficiency. By carefully following established procedures and using specialized tools, I helped maintain the unit's optimal operating conditions and protect the environment from harmful refrigerant leaks.
Brandon B.
I recently completed a big commercial AC system at a restaurant. The system was old and outdated, so I had to completely replace it. I removed the old system and disposed of it safely. Then, I installed the new system and made sure it was working properly. I also tested the airflow and temperature in each room to ensure the system was distributing air evenly.
Mason B.
Heating and air repair. Customer had bad condenser fan motor. Replaced Motor and got customer back cooling.
Mason B.
AC repair bad compressor. Replaced compressor unit running good and efficiently
Mason B.
AC repair. Bad condenser fan motor replaced and got unit up and running
Mason B.
Septic tank pumping and jetting pumped 1500gal septic tank and jetted inlet line to tank
